Archive for March, 2008
Friday, March 28th, 2008
VTEC controller for Honda VTEC engines adjusts manifold pressure, fuel adjustments and VTEC activation points. Make the right tuning and the VTEC can give your Honda additional horsepower gains.
It also gives the driver an option to follow VTEC switchover rpm, air-fuel ratio, etc. It works with a piggy-back computer control, which can take control over the air fuel pressure, VTEC engagement point, etc according to rpm requirements.
You also may like to get VTEC controller and air-fuel gauge in one simple unit, helping you keeping close watch over engine workout and take control over its exhaustion. RPM and air fuel ratio tracking and control with just one module, VTEC controller appeals to most VTEC powered Honda users.
Accurate control over air pressure and fuel supply – just at the right amount to maintain rpm levels, computer enabled VTEC controller gives highest levels of fuel tuning capabilities.
The user definable VTEC controller comes with adjustable fuel curve set in specific (500) rpm increments. Fuel mapping can be set under specific configurations according the demands off the engine.
Apex-i, Field, Skunk etc are the main brands that you can find. Most of them come with digital display, while analogue display is also available. Both works fine.
VTEC controller really is a complex setup and it is better to get expert mechanic to fit one for your Honda/Acura.
VTEC controller is more than a cool addition for your Honda/Acura, but also a computer control that optimizes fuel efficiency, vehicle longevity and control over drive.
Posted in VTEC Controller | No Comments »
Friday, March 28th, 2008
Turbo boost gauge looks cool on the dashboard and gives significantly important information from the engine. In case there is a pressure leak, it can quickly tell you something’s wrong. With the whooshing sound coming from the turbo, the turbo boost gauge is only logical addition to your dashboard. Also let the passengers you take know that you have the real turbo under the hood and the noise is not from a fake turbo boost.
Just as it looks cool on the dashboard, the turbo boost gauge also lets you know the conditions at the engine. The turbo boost gauge draws input from either manifold, turbocharger or supercharger boost pressure. Installed directly on the dashboard or on a gauge pod, a turbo boost gauge gives clearer visibility to the driver.
Turbo boost gauge comes as factory fitting for turbo charged vehicles. There are also models that don’t come with a turbo boost gauge. In such cases, an aftermarket gauge will be your option. Installing is a bit technical task, you will need to read at least a few times before starting the installation process. It is better to get a gauge pod to install the turbo boost gauge than fixing it on the dashboard. It gives better visibility.
Plan to play around with boost levels, you have a good turbo boost gauge to support your expeditions. Always keep track of the boost levels you push your vehicle into. With other gauges that tell you in detail about rpm and other factors, you know when your engine gets maximum boost and when it actually start getting the benefits of the turbo.
Posted in Turbo Boost Gauge | No Comments »
Friday, March 28th, 2008
AC S7 gauge comes multi-coloured, light balanced and fits well to dash lighting settings. S7 gauges come with electro luminescent technology, delivering maximum clarity. It matches any factory set dash lighting and brightness can be adjusted with a special controller.
S7 gauge always looks fine on your dashboard and keeps track of all the different parameters of engine growling that you want to. S7 gauge also spots a classic look with metallic finish. The markings are accurate and readings always precise. S7 is something that race drivers never want to miss.
S7 gauge is easier to install straight on the dash or mounted on a gauge pod. Different gauges can incorporate into one unit. Installation is best handled by a professional, with precision care. Over-tightening of screws can damage the gauge face.
If style, comfort and usability are things you look for, S7 gauge is a good investment. With night glow gauge faces for your Honda/Accord, you have a cool addition on your dashboard. It surely gives a warm, classy look.
Coming with different colour options and adjustable brightness, you can confidently expect the S7 gauge to serve you under all driving conditions. AC s7 night glow gauge faces – if it is the thing you are looking for, you can get some real good deals online. Place your order at an ecommerce site that you feel comfortable. Just as you take a detailed look at the appearance of the gauge and accompanying description, you must also take a look at the privacy and security policy of the company.
Posted in S7 Gauge | No Comments »
Friday, March 28th, 2008
Light strobe to give your car, SUV or truck the distinctive personality while pulling up at traffic, during night. Light strobe has now gone LED way. With multiple colour options – white, blue, green, red – don’t attempt to flash the strobe light on a street cruise, as it is an illegal affair in most areas.
Program the strobe light to dance to the tune of music. Sometimes you just need to light up your vehicle with light strobe. Your vehicle receives immediate attention, while you are enjoying yourself at a party or while you have driven to a car show off event, where everyone will stop to see the wonder of the flashing car.
Earlier light strobe used to be an exclusive item for police vehicles. LED light strobe reaches cars and trucks and gives them a flashy look. You can make light strobe to dance according to the music playing. Switch on the strobe light when your vehicle is parked, which means you need to use power from the battery. LED light strobe ensures you consume little power, even after leaving it flashing for a long time.
It is just OK to leave the light strobe flashing while you are at a party or are about to get into the party – as long the vehicle is not moving and other drivers don’t get distracted. Light strobe is a fancy item, designed to attract attention. It is not just for discos and theatres, but also for those car owners who want to grab a little attention to their possession.
Posted in Light Strobe | No Comments »
Friday, March 28th, 2008
Defi boost gauge helps you keep tab of boost levels and engine conditions. This aftermarket part comes well designed and fitting for most vehicle models. Defi boost gauge is affordable and comes with clean display.
Defi boost gauge is for turbo charged vehicle that is yet to get a boost gauge. If your dashboard has enough space to accommodate another gauge and if your eyes reach the spot quite comfortably, you can install it on the dashboard itself. If your dashboard is all used up, the next best option is to place the Defi boost gauge on a gauge pod, where it fits well and looks nice. If your dashboard doesn’t have the space for a gauge pod, it can get a bit difficult to actually install the item.
Installing can also require cutting the dashboard for making room for the gauge or the gauge pod. It is a bit techie task, take extreme care not to spoil your dash. If you are not that confident of getting it done all by yourself, get the help of a professional.
Keep track of what is going on in the engine and if you have reached or exceeded the optimum turbo levels. It is good to know when you are in sync with your motor and when you are not. Most importantly, Defi boost gauge gives you an option to push to the peak of performance, without worrying about spoiling your engine.
It is not just a cool addition to your dashboard, but also a great tool that lets you know the exact conditions.
Posted in Defi Boost Gauge | No Comments »
Friday, March 28th, 2008
Do you drive your turbocharged vehicle without a boost gauge? You can very well get an aftermarket boost gauge that works just fine for your vehicle. You can install the boost gauge on a gauge pod on the dashboard. When you eventually start playing with turbo boost levels, this boost gauge will be of high use. You also can know how much boost you already achieve and how much is left for you to test.
Some models do come with a boost gauge built in. If your vehicle doesn’t have one, you can find one that works fine for you. It measures the turbo charger or boost pressure. A boost gauge becomes unavoidable, if you plan pushing to levels beyond OEM standards.
By accurately keeping the boost pressure under control, you can also extend the life of the engine. Boost gauge is normally installed on a gauge pod for better visibility, which lets you know what goes inside the turbo. This helps you control your driving according to the demands from the vehicle. Once in place, you can confidently press the accelerator, knowing everything is under control.
Boost gauge installation is highly technical task. Enthused drivers can install it themselves after thoroughly reading the installation manual. It looks cool, of course, it also brings to you news from the engine – what goes on there. Present before your friends your vehicle as the ultimate cool thing in the world, the boost gauge gives you additional marks, when it comes to beauty contest by dashboards.
Posted in Boost Gauge | No Comments »
Friday, March 28th, 2008
Boost controller takes control over the boost level produced at manifold of turbocharged engine. Boost controller can be as simple as manual control to as complex as a computer aided electronic control. Apex-i and GReddy are names to watch out for, when you set your sight at the top end.
Installing boost controller requires a bit of drilling the platform and making some adjustments at the dashboard. At the end, you get a good system to control the boost levels, where you take more control over your driving – street and race.
Manually adjustable boost controller comes with a screw-action knob, which you can adjust to control the boost pressure levels. Electronic boost controller also requires some drilling before installation and the process is complex.
When looking to install boost controller for factor fitted turbo, it can pose some risk of over pressure affecting the performance and life of the engine. Thus, it is also necessary to learn the optimum levels of turbo boost and pressure that your engine can handle. Without an understanding of the maximum capacity of the engine, it is a bit risky to install boost controller in an attempt to increase performance.
Keep this in mind while you plan to increase boost by prompting waste gate to open to a higher pressure than is intended by the manufacturer. More pressure into the engine also requires equivalent freeing of the engine’s interior via exhaust.
Automatic boost controller comes with more advanced system, effectively controlling compression ratio and increasing fuel economy.
Posted in Boost Controller | No Comments »
Friday, March 28th, 2008
Air fuel gauge helps you keep track of the air to fuel ratio that the engine receives. It gives you considerable advantage as you are able to keep track of the oxygen to fuel levels. Optimum mixing and pressure of air and fuel facilitates complete burning of the fuel. Air fuel gauge is a must for all vehicles equipped with a turbo booster.
Air fuel gauge either can come with a dial and needle design or with LED lights. LED blinking at the bottom only tells lean oxygen supply, whereas high levels indicate rich airflow.
Air fuel gauge helps you optimize your tuning to the engine, without going to the extremes of drilling a hole in the piston. Set the air intake to rich and you know when there air supply goes rich. When it goes leaner, as it always would, you can lift your right foot, a bit, for quite a while.
LED style air fuel gauge normally comes with 10 or 20 LEDs. Needle against dial comes with contrasting colours for the dial and the needle for easy perception.
With a little practice with air fuel gauge, you can achieve significant fuel savings and emission curbs, while actually improving engine performance and engine life. Careful air fuel ratio mapping through the ranges of rpm and manifold intake pressure allows you to maximise engine performance, while ensuring engine longevity.
You can easily fine lean mixtures working fine while cruising at good pace. You will also learn how to minimise the emission of hydrocarbons.
Posted in Air Fuel Gauge | No Comments »
Friday, March 28th, 2008
Ac gauge for almost all gauges that rest on the dashboard. Oil temperature/pressure, air-fuel ratio, voltage, turbo boost, coolant temperature – Ac gauge has it all.
Ac S7 night vision gauge is right choice gauge for almost all purposes. When it comes to the AC gauge, you can find them from literally hundreds of ecommerce sites. You know the success of Ac gauge is proportional to the quality it delivers. Coming with backlight, nightglow options, you have a range of analogue gauges.
Comes with good visibility needles and contrasting dial, you get a quick idea of whatever parameter you need to keep track of. Easily recognizable gauge readings are necessary, especially for the drivers whenever they are on the street or on the racetrack. They may take a split second to glance over the ac gauge and should be able to glean all the information necessary for the smooth drive.
With Ac gauge, it is truly possible. Choose the gauge that has contrasting colours for dial and needle. A brightly coloured needle against a light coloured dial background is just fine.
Sure you can purchase Ac gauge from a variety of sources. Good ecommerce sites do offer good deals. Whatever details you need to track about your engine or vehicle performance. Air fuel gauge, ac turbo boost gauge, or any gauge that you need, you always have the best choice. It is also great that you can buy from a few trusted websites, whatever Ac gauge you require and for whatever model vehicle you have.
Posted in AC Gauge | No Comments »
Friday, March 28th, 2008
For those people who drive that Nissan 240SX, when looking for replacement parts, can opt for the aftermarket products made available by a few manufacturers. The sleek sexy car has not gone out of style and the demand for 240SX intake manifold suggests there is more to come.
Looking for the best way to supply fuel to your engine, 240SX intake manifold is more than just fine for Nissan 240SX and a few more. Well when looking for aftermarket parts like 240SX intake manifold, junkyards are not necessarily the first place to look. It is not to say you can’t find great deals at what you call the place a junkyard – it is simply because the aftermarket parts manufacturers and dealers have better knowledge of what they handle and sell. If given a choice, your best bet is to go for the aftermarket dealers, who mean it when they say 240SX intake manifold.
When you look for a better way of fuel supply to your engine with a 240SX intake manifold, or to replace the manifold of your engine, you are lucky to have quite a few ecommerce sites selling the item, while also giving you reliable support. Not an extreme techie job, you can handle 240SX intake manifold installation. However, if you are not that confident or happy about that task, it will be better to get the assistance of an expert mechanic. It is all up to you to make the right choice for your vehicle – the choice that fit your pocket and style too.
Posted in 240SX Intake Manifold | No Comments »
|